High frequency bent wood thermocompressor
The high frequency bent wood thermocompressor applies high frequency heating to the hydraulic machine, and achieves rapid bonding molding of bent shaped products. It is widely used in furniture, musical instruments, handicrafts, etc.
Features
1, Penetrating -type heating, homogeneous heating, quick shaping(only a few seconds to a few minutes).
2, Use of wood molds reduces replacement costs. One-way, three-way and multi-way hydraulic machines can be flexibly combined.
3, Good stability. After molding, the wood will not deformed for a long time.
4, Environmental friendly; free from dust
| Model | QLYJ-100DⅡ | QLYJ-150DⅡ | QLYJ-200SⅡ | QLYJ-350SⅡ |
| Total pressure(t) | 100 | 150 | 200 | 350 |
| Workbench size（mm） | 1200×1000 | 1500×900 |
1600×650/ 650×650 |
1600×700/ 700×700 |
| Hydraulic size | One-drive-two | |||
| Horizontal pressure（t） | 0 | 0 | 100 | 200 |
| Vertical pressure(t) | 100 | 150 | 100 | 150 |
| Max.Range between upper and lower workbench（mm） | 1000 | 1200 | 1600 | 1800 |
| Max.Range between upper and lower workbench（mm） | 0 | 0 | 1800 | 1800 |
Note: The company's products continue upgrading. The actual manufacturing prevails!
中文
EN
